Posts tagged with "Juniper"
How to Configure IP Address in Juniper Router Interface
To configure an IP address on a Juniper router interface, access the router via CLI and enter configuration mode using …
Apr 11, 2025
Suresh Thapa
How to Configure DHCP Server on Juniper Router and Switch
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables a server to automatically assign an IP ad…
May 25, 2025
Suresh Thapa
How to Configure VLANs and Trunk Ports on Juniper Switch
In this blog, we’ll walk through how to configure VLANs, Access Ports, and Trunk Ports on Juniper switches using JunOS …
May 28, 2025
Suresh Thapa
Juniper Switch Routed VLAN Interface (RVI) L3 Interface
Why Should I Use an RVI? In addition to providing communication between VLANs, an RVI binds specific VLANs to specific …
May 28, 2025
Suresh Thapa
VLANs, Access and Trunking Ports on Cisco vs JunOS
Both Cisco IOS and Juniper JunOS, the operating systems for their respective networking devices, implement VLANs with s…
May 31, 2025
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: Underlay Network Design & Anycast Gateway (Part 1)
A Practical Guide Using Real-World Configurations Modern data centers rely on scalable, resilient Layer-2 extension ac…
Mar 17, 2026
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: BGP EVPN Overlay (Part 2)
What is BGP EVPN Overlay? BGP EVPN replaces traditional flooding-based learning with a control-plane driven approach. …
Mar 20, 2026
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: VXLAN & Anycast Gateway (Part 3)
This is where: VXLAN tunnels are formed VLANs are mapped to VNIs Distributed gateway (IRB) is enabled Inter-VLAN …
Mar 31, 2026
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: Test PCs & ESI Multihoming (Part 4)
Now in Part 4, we focus on: Connecting end devices (Test PCs/Servers) Configuring ESI Multihoming (Active-Active redu…
Apr 07, 2026
Suresh Thapa
